| |
 Pressure Systems, Inc., manufacturer of KPSIT Level and Pressure Transducers, has
released a cost-effective, non-fouling level transducer featuring a wide Teflon®
coated sensing area. The new submersible Series 705 level transducer provides
reliable depth measurement under adverse conditions, making it ideal for highly
viscous applications including lift stations, slurry, and pump control.
The Series 705 incorporates a flush elostomeric diaphragm with a
surface area of 0.90? to prevent clogging. The transducer is available in custom
level ranges from 6 to 115 ft. H2O with analog outputs of 4-20 mA or
0-5 VDC. The 705 is compensated over the temperature range of 0 to 50° C.
The transducer's rugged construction safeguards against damage
from hostile environments. A welded 316 SS or Titanium housing protects the
transducer?s advanced electronics, which can optionally include lifetime
lightning protection and temperature measurement output. The Series 705 is
available with custom lengths of cable, which utilizes Kevlar® strength members
to prevent errors due to elongation and incorporates a unique water block
feature that self seals if the cable is accidentally cut. The transducer is
shipped with an installed maintenance-free SuperDry™ vent filter that prevents
moisture from entering the vent tube for at least one year.
When connected to appropriate apparatus, the Series 705 can be
installed in Class I, Division 1, Groups A, B, C and D; Class II, Division 1,
Groups E, F and G; and Class III, Division 1 hazardous locations. KPSI
transducers are IS approved by UL, CUL as well as FM; and carry IP 68 and NEMA
6P housing protection ratings. In addition, the series is CE compliant to EN
61000-6-4:2001 and EN 61000-6-2:2001.
|
|
