IMPORTANT waterMONITOR Series Firmware Upgrade Notice:
Pressure Systems has identified an issue with version 2.1 firmware for the waterMONITOR Series of submersible datalogging level transducers. This issue is a concern only when a test has both a scheduled start and end time. This concern is easily resolved by upgrading to the latest revision (version 2.2) of the waterMONITOR firmware. Should such a condition occur, please follow the procedure, Recovering From Firmware Upgrade Errors.
|
|
K-ware (Version 1.7.0) |
|
KPSI Transducer applications software that fully supports the
waterMONITOR Series of datalogging transducers as well as the Series 500 SDI-12 level transducers. |
- Provides configuration, "live" data acquisition, recording,
playback, and data conversion for all functionality.
- Supports autonomous datalogging (AutoLog), data extraction, and alarm checking (with broadcasts).
- Supports barometric compensation of data from "absolute" reference pressure formats of waterMONITOR level transducers using pressure readings from a baroMONITOR.
- Supports wireless remote access to installed waterMONITOR transducers via modem interface.
|
Version 1.7.0 provides an improved transducer Hot-Swap function and fully supports the latest transducer firmware (Version 2.2). Version 1.7.0 also includes improved diagnostic capabilities to assist PSI support personnel in resolving customer problems. It also provides support for the latest battery-free offerings of the waterMONITOR. Read the separate Release Note and the red-line text in the updated User's Manual for more information on the changes made.
|
|
K-ware Mobile (Version 1.6.2) |
|
Windows Mobile™ 2003/2005 based handheld
software for waterMONITOR Series |
- Freely available, user-friendly software
- Similar utility as K-ware on a desktop PC
- Able to log data and configure tests in
waterMONITOR transducers
- Extract logged data and save to a file
- Intuitive Graphical User Interface
Minimum Recommended Hardware (handheld
devices intended for use with K-ware Mobile should have the following
minimum specifications):
1. Windows Mobile 2003SE or Windows Mobile 5
2. At least 1 CF card slot (required for CF serial port adapter)
3. A CF RS-232 port adapter with 9 pin D-shell connector
Devices that have been confirmed to run
K-ware Mobile include HP IPAQ© 4700, IPAQ© 2795, and
Tripod Data Systems RECON©
|
| K-ware Desktop (Version 1.6.2) |
Windows™ 98, 2000 and XP application for waterMONITOR Series
- Graphical user interface shared with K-ware Mobile
- Data files in a standardized format
- Goal oriented; reduces time to productivity
Minimum Recommended Hardware:
- System must be capable of running the .NET CLR (Common Language Runtime, available from Microsoft Download) version 2.
- An RS-232 serial port is required for interface to the Series 550 waterMONITOR.
|
|
Series 550 waterMONITOR Firmware Upgrade (Version
2.2) |
|
Latest firmware upgrade for use with
Series 550 waterMONITOR submersible datalogging
level transducer. |
-
For applications utilizing the no-sleep option with multiple transducers (i.e. cell modem applications), a significant amount of command retries was necessary to retrieve data from the transducers. This bug was corrected by properly handling communication flow when the SDI-12 mark/break sequence (i.e. no sleep mode) is disabled.
-
Updated the firmware for new product Model number assignments (i.e. 561, 570, 571).
|
|
Re-Ranging Utility Installation Program (Version
1.4.3) |
| Utility software for use with
Series 770 and associated Re-Ranging Interface
Device (RRID) |
-
Programmably alter the output of the
transducer by as much as 10:1 turndown
-
Adjust terminal readings (zero and span)
at any turndown
|
| |
